Claus sulfur recovery plant

Process-chemistry model: acid gas (H2S) to elemental sulfur through a thermal stage and catalytic reactors.
Sulfur recovery
Liquid sulfur
H2S : SO2 at stage 1
Tail gas H2S + SO2
The science

The Claus process turns H2S from gas treating into sulfur. One third of the H2S is burned to SO2 in a furnace, then the rest reacts with it over alumina catalyst. Sulfur is condensed after every stage, which pulls the equilibrium forward.

H2S + 3/2 O2 -> SO2 + H2O (furnace, exothermic) 2 H2S + SO2 <-> 3/x S_x + 2 H2O (Claus, equilibrium-limited) overall: 2 H2S + O2 -> 2/x S_x + 2 H2O ideal feed to the Claus reaction: H2S : SO2 = 2 : 1

Stage extent: ξi = η(Ti) · min(nH2S/2, nSO2), with η(T) = 1 / (1 + exp((T − 270)/40)). Each reaction event makes 3 S atoms. Colder reactors favour sulfur, but must stay above the sulfur dew point (about 180 °C) so it does not condense on the catalyst.

Honest simplifications. η(T) is an illustrative fitted curve (it falls with temperature, as the exothermic equilibrium does), not tabulated thermodynamic data. The furnace converts a fixed 60 % of the limiting reagent. Inert CO2 and N2 only dilute. There is no COS/CS2 formation or hydrolysis, no hydrocarbons, no ammonia, no tail-gas treating unit, and sulfur is modelled as total S atoms. Educational process chemistry only.

Independent numerical checks