MEMBRANE / LAB
Transport phenomena · Model 04 / 12
Reverse osmosis · Film theory

Where the salt gathers

Explore concentration polarization at a membrane surface. Pressure pushes water through; rejected salt builds a boundary layer that raises the local osmotic pressure and throttles the flux.

A single-element teaching model. Change the operating point and watch the boundary layer respond.
Cross-section / live process
The selective boundary
RUNNING · IDEALISED
WaterRejected saltMembrane active layerPermeate channel
Water flux
21.46 LMH
Salt rejection
99.21 %
Permeate salinity
0.28 g/L
Surface / bulk ratio
1.43 ×

Pressure response

Flux vs applied pressure

Boundary-layer response

Permeate salinity vs k
The science · assumptions and checks
Coupled transport model
Jᵥ = A(T) [ ΔP − β(T)(Cₘ − Cₚ) ]
Jᵥ Cₚ = B(Cₘ − Cₚ)
Cₘ = Cₚ + (Cᵦ − Cₚ) exp(Jᵥ / k)

Jᵥ is water flux (L m⁻² h⁻¹); Cₘ, Cₚ and Cᵦ are membrane-surface, permeate and bulk-feed salinity (g/L). A is water permeability, B is salt permeability, and k is the film mass-transfer coefficient. β uses ideal van't Hoff osmotic pressure for NaCl; A(T) uses a simplified empirical temperature correction.

Independent numerical check

Checking salt-flux closure…

Salt transport is calculated two ways: membrane diffusion, B(Cₘ − Cₚ), and convective permeate transport, JᵥCₚ. The residual should approach zero. The water-flux equation is also re-evaluated after root solving.

Model limits: steady single-element slice; no axial salinity depletion, pressure drop, fouling, support-layer resistance or non-ideal activity corrections. Values are illustrative, not plant-design predictions.

Made with 🤖 ChatGPT