← 🧪 Chemistry

🛢️ Cracking Unit

Reactor temperature 550 °C
⛽ Gas (C1–C4)0%
🚗 Gasoline (C5–C9)0%
✈️ Kerosene (C10–C12)0%
🚚 Diesel (C13–C15)0%
🛢️ Residue (C16+)0%
Feed molecules cracked: 0
Fragments produced: 0
Avg fragments / feed: –
Alkene share: –
Drag — rotate · Scroll — zoom

🛢️ Petrochemical Cracking Simulator: Thermal vs Catalytic (FCC) Hydrocarbon Cracking

3D refinery cracking-unit model: heavy C16H34 alkane chains enter a reactor tube, undergo homolytic C-C bond scission into shorter alkane and alkene fragments, then rise through a fractionating column that sorts them into gas, gasoline, kerosene, diesel and residue by simulated boiling range. Toggle thermal (450–750°C, non-catalytic, random scission) vs catalytic FCC (zeolite catalyst, lower temperature, gasoline-selective) cracking and watch live fraction-yield bars update.

🔬 What It Demonstrates

Thermal cracking breaks C-C bonds homolytically into free radicals, which unzip the chain from its end and produce a gas-heavy, alkene-rich spread of products. Catalytic FCC instead forms carbocation intermediates on a zeolite catalyst; because primary (chain-end) carbocations are unstable, scission clusters mid-chain and produces more branched, gasoline-range molecules, and the catalyst's hydrogen-transfer chemistry re-saturates many alkenes into higher-octane iso-paraffins. Switching modes at the same reactor severity makes the real-world selectivity difference visible in the live yield bars.

🎮 How to Use

Pick Thermal or Catalytic FCC, set the reactor-temperature slider (400–800°C) to control severity and crack probability, then press Start Reaction to continuously feed C16H34 chains into the reactor. Watch each chain crack partway down the tube and its fragments rise through the fractionating column into the gas, gasoline, kerosene, diesel or residue band that matches their carbon count. Reset clears the reactor and column and zeroes every yield stat.

💡 Did You Know?

Fluid catalytic cracking (FCC) units process roughly a third of the world's crude oil and are usually the single most profitable unit in a refinery — they convert cheap heavy gas oil into valuable gasoline and propylene using nothing but a fine zeolite catalyst powder fluidized like a boiling liquid.