RD
Reaction–Diffusion LabGray–Scott pattern formation · scientific simulation family
ENGINE 1.0.0RUNNING
Laboratory 06 / Guided design challenge

Challenge mode

Engineer a structured reaction pattern by tuning feed, kill and diffusion. Meet measurable field-quality objectives before the simulation budget runs out.

MISSION / PATTERN STABILITY
t = 0 steps

Mission field

Build a spatially structured activator pattern

IN PROGRESS
Activator V concentration0 / 2,400 steps
Mission objectives
Activator coverage 6–18%Pending
Mean V0.000
Coverage0.0%
Peak V0.000
Variance0.000
Mission budget2,400 steps

Mission briefing

Acceptance criteria and scoring logic

4 objectives
Create a non-uniform, active chemical pattern. At evaluation, the field must have a controlled activator footprint, measurable concentration and non-trivial spatial structure. You can change the shared parameters at any time; Reset restarts the 2,400-step budget using the current parameters.

Objective A · Occupancy

V coverage must lie between 6% and 18% at threshold V ≥ 0.10.

Objective B · Concentration

Domain mean V must lie between 0.015 and 0.075.

Objective C · Active peak

At least one cell must reach V ≥ 0.40.

Objective D · Structure

Spatial variance of V must be at least 0.0020.

Mission scoring is computed from the same field statistics as the Data & Report module. A pass requires all four criteria simultaneously.