SCIENTIFIC SIMULATION FAMILY / 2026
Electrochemical corrosion
laboratory
Investigate metal dissolution, oxygen reduction, mixed potentials and corrosion control. Eight complementary labs share one reproducible electrochemical model, so an experiment configured in one module can be continued in another.
Live reference condition
SHARED STATEChange conditions inside any lab. Navigation transfers the current scenario automatically.
Scientific core
MODELButler–Volmer/Tafel anodic kinetics, oxygen reduction with a diffusion-limiting current, mixed-potential balance, Faraday's law and a two-metal galvanic-coupling balance.
Offline-ready
NO BACKENDRuns from local files in a modern browser. No external APIs, paid services, server database or build step are required.
Laboratory modules
Corrosion cell cross-section
Explore the steel–electrolyte interface, oxygen transport, rust formation and protection layout.
OPEN LAB → 02 / POLARIZATIONEvans diagram
Locate the corrosion potential and current at the intersection of anodic and cathodic branches.
OPEN LAB → 03 / EXPERIMENTExposure experiment
Integrate mass loss and penetration over time under controlled environmental conditions.
OPEN LAB → 04 / ENGINEERINGProtection design
Compare bare steel, coatings, impressed current and sacrificial-anode protection.
OPEN LAB → 05 / MATHEMATICSKinetics explorer
Inspect activation kinetics, oxygen transport limits, pH shifts and temperature sensitivity.
OPEN LAB → 06 / MATERIALSGalvanic coupling
Study dissimilar-metal contact and the influence of cathode-to-anode area ratio.
OPEN LAB → 07 / DESIGN TASKProtection challenge
Meet a corrosion-rate target while keeping the protection-current demand controlled.
OPEN LAB → 08 / ANALYSISData & report
Compare scenarios, inspect calculated outputs and export reproducible data and reports.
OPEN LAB →