Presets
Playback
Feedstock and kiln
Choose a feedstock, then the peak temperature, hold and heating rate. The kiln replays the chosen run.
Soil, climate and dose
The soil model starts below its equilibrium carbon so the effect of the char is visible.
Camera
Layers
Quality
Model checks
The science
From wood to biochar to soil carbon. Biochar is the solid left when biomass is heated with little oxygen (slow pyrolysis). The three main polymers decompose at different temperatures, the char that remains becomes more aromatic with temperature, and that aromatic carbon resists microbes for centuries.
1. Pyrolysis kinetics
Hemicellulose, cellulose and lignin are treated as parallel first-order reactions with Arrhenius rate constants, dm_i/dt = -k_i m_i, k_i = A_i exp(-E_i / R T), with E = 100, 200, 45 kJ/mol (lignin is slow and spread over a wide range). Each reacted gram leaves a fixed share as char (c = 0.27, 0.17, 0.50); the rest escapes as vapour and gas. The temperature follows a ramp T = 25 + beta t and then a hold. Each step uses the exact exponential update m ← m exp(-k dt), which is stable even when k reaches 105 1/s.
Char then aromatises: d alpha/dt = k_a (1 - alpha), E_a = 60 kJ/mol. It lowers the solid mass a further 30 % at alpha = 1 (dehydrogenation) and sets the composition: carbon in the ash-free char 0.52 + 0.38 alpha (plus 0.05 above 550 C), molar H/C = (0.90(1-alpha) + 0.12 alpha), falling again above 550 C as graphitic order grows. The ash in the feedstock stays in the char, so high-ash feeds such as poultry litter give a heavy but carbon-poor char.
2. Carbon stability
The char carbon is split into a labile fraction f_L = 0.02 + 0.35 (1 - alpha)1.5 with a half-life of about 110 days and a stable fraction whose half-life follows the molar H/C ratio (Spokas 2010 classes: H/C < 0.4 above 1000 years, 0.4 to 0.7 between 100 and 1000 years, above 0.7 under 100 years, interpolated log-linearly). Remaining fraction: C(t)/C0 = f_L exp(-k_L f_env t) + (1 - f_L) exp(-k_S f_env t), k_S = ln2 / t1/2
with the environment factor f_env = 2(T_s - 15)/10 m(w) (a Q10 of 2 and a moisture function peaking near 60 % wetness).
3. Soil carbon pools
Four pools in t C/ha: fast litter F, slow humus S, biochar labile B_L and biochar stable B_S:
dF/dt = I - p k_F f_env F, dS/dt = h p k_F f_env F - p k_S f_env S, dB/dt = -k_B f_env B
with k_F = 0.30/yr, k_S = 0.010/yr, humification h = 0.20 and plant input I. p = 1 + P d/(d+10) (B/B0) is the priming factor on native carbon (P is the slider; negative means biochar protects native carbon). Integration is RK4. The comparison run has the same soil without biochar; the difference times 44.01/12.01 is the CO2 equivalent stored. Carbon in the dose is dose x (C fraction of the char).
4. Cation exchange, water, pH
Fresh char CEC falls with temperature, CEC = 40 exp(-(T - 300)/200) cmol(+)/kg, and rises towards 50 as surface carboxyl groups form with a 6-year time constant. Soil CEC = 4 + 0.9 x clay%; the mixture is weighted by the biochar mass fraction in the top 15 cm (1950 t soil/ha). Water holding and pH shifts are simple linear mixing terms tied to the same fraction.
Honest simplifications. Kinetic constants, char shares, half-life anchors, CEC and water terms are textbook-order values chosen to reproduce typical trends (yield 35 % to 22 %, H/C 0.8 to 0.05, centuries to millennia of stability); real feedstocks, kilns, soils and climates vary widely, field half-lives are debated, and priming can be positive or negative. The plant-response index that sizes the seedlings is a visual aid, not a yield forecast. No fuel, emissions or economic model is included.
Checks run in the page. (1) Kissinger method: the activation energy of cellulose recovered from the peak temperatures of two simulated heating-rate runs against the input value; (2) RK4 of the two char decay pools against the closed form, plus the numerically measured half-life against ln2/k; (3) the fast and slow soil pools without biochar against their closed-form solution.
What to try
- Press Low-temperature 350 C and then High-temperature 700 C: the yield falls but the carbon in the char, the H/C ratio and the stable half-life move the other way.
- Compare Pine wood with Poultry litter at the same temperature: ash stays in the char, so the char is heavy but holds far less carbon.
- Raise the soil temperature from 5 to 25 C: the labile pool disappears faster and the humus turns over faster.
- Set priming to +30 % and then to -30 %: see when biochar adds net carbon and when it only replaces native carbon.
- Drag the soil-time slider or watch the char fragments in the soil block shrink; the particle on the right shows how exchange sites fill with cations.