MYSIMULATOR · SCIENTIFIC SIMULATION FAMILY

Autocatalytic chemical oscillations

Explore how a compact reaction-kinetics model moves from a stable steady state to sustained oscillations. Eight complementary laboratories share one numerical engine, one parameter set and portable experiment scenarios.

dX/dt = A − (B + 1)X + X²Y   ·   dY/dt = BX − X²Y
01 / CROSS-SECTION

Reaction vessel laboratory

Watch the two dimensionless concentrations evolve in an animated, conceptual stirred vessel.

02 / TIME SERIES

Oscillation graph laboratory

Read live concentration traces and the corresponding phase portrait.

03 / EXPERIMENT

Controlled experiment bench

Change one experimental factor and compare the result against a reference run.

04 / COMPARISON

Scenario comparison

Run up to three parameter scenarios with common initial conditions.

05 / DYNAMICAL SYSTEMS

Phase-plane explorer

Inspect vector flow, nullclines, equilibrium and a simulated trajectory.

06 / CHALLENGE

Stability challenge

Tune the system to meet a hidden stable or oscillatory regime objective.

07 / DATA

Data analysis & report

Measure peaks, amplitudes, means and periods; export the raw time series.

08 / PARAMETER SPACE

Stability map laboratory

Explore the analytical Hopf boundary and test parameter combinations.

One shared scientific engine

All modules use the same dimensionless Brusselator equations, fourth-order Runge–Kutta integration, equilibrium calculation and linear-stability criterion. Module navigation carries the current A, B, X₀, Y₀ and observation duration in the URL.

This is an idealized, well-mixed theoretical model. It illustrates autocatalytic oscillation and bifurcation; it is not a quantitative recipe or a direct predictor for a specific laboratory chemical mixture.

Quick-start parameters

A
1.00
feed parameter
B
3.00
feed parameter
Hopf B
2.00
1 + A²
Regime
Oscillatory
B above boundary
Made with 🤖 ChatGPT