Presets
Playback
Parameters
Camera
Layers
Quality
Model check
The science
What you see. A 20 m pile of waste rock that contains pyrite (FeS2) and a little calcite. The pile is cut open at the front: blue is oxygen that has diffused into the pores, gold specks are pyrite that has not reacted yet, pale specks are calcite. Rain percolates through the pile and leaves at the toe; the pond and the stained ground change colour with the pH of that seepage. A time cursor runs through 200 years.
Oxygen. Pyrite only oxidises where oxygen arrives, and in a pile oxygen arrives by slow diffusion in the pores. In steady state De c″ = k c with c(0) = C0 and no flux at the bottom, so the flux through the surface is J = C0 √(De k) tanh(H √(k/De)). The rate constant k follows the pyrite left (∝ φ2/3, shrinking grains) and a Q10 of 2 for temperature. A cover that cuts De by a factor 1000 cuts the flux by about 30.
Chemistry. FeS2 + 15/4 O2 + 7/2 H2O → Fe(OH)3 + 2 SO42− + 4 H+. While calcite remains, CaCO3 + H+ → Ca2+ + HCO3− takes up the acid and the seepage pH follows the carbonate system, pH = 6.35 + log(HCO3/(KH pCO2)). When the calcite is gone, the water carries free acid (2 H+ per pyrite, the rest is held back as iron) and pH drops to about 2. The delay is the lag time: the pile can look harmless for decades before the acid appears.
Honest simplifications. One-dimensional diffusion-reaction with a uniform pyrite content; transport of oxygen only by diffusion (no convection or thermal chimney effects); the whole exposed surface is treated like the top surface; seepage is infiltration times footprint, fully mixed; one calcite pool at 1 H+ per mole (a conservative figure); no aluminium, silicate or gypsum buffering and no bacterial kinetics, so the acid pH is lower than many field values (typically 2 to 4). Rate constants are chosen to give lag times of decades, not measured on a particular rock. Numbers such as 1.5 % pyrite are illustrative.
Checks. (1) The analytic oxygen flux equals a finite-difference solution; (2) the pyrite, sulfate and acid ledger closes and the result is time-step independent; (3) the calcite lag time equals the constant-rate formula; (4) pile volume and exposed area integrated from the Blender mesh equal the cone-frustum formulas.