Presets
Playback
Parameters
Camera
Layers
Quality
Model check
The science
What you see. The heart of a sulfuric-acid plant: a steel converter with four beds of vanadium-pentoxide catalyst, heat exchangers that cool the gas between the beds, an absorption tower and a stack. The vessel is cut open at the front. Glowing catalyst and gas particles show the temperature inside each bed.
Reaction and equilibrium. SO2 + ½ O2 ⇄ SO3 releases −ΔH ≈ 99 kJ/mol. At equilibrium Kp = pSO3 / (pSO2 pO21/2), with the empirical fit log10 Kp = 5129/T − 4.870 (atm−1/2). The equilibrium conversion at the current composition and pressure is found by bisection on the extent of reaction, so it falls as the gas gets hotter: the reaction heats its own gas until it chokes itself.
Adiabatic beds and cooling. Inside a bed there is no heat exchange, so n cp (T − Tin) = (−ΔH) ξ (about 300 K of heating per unit conversion at 10 % SO2). The gas therefore climbs along a straight line in the temperature–conversion plot until it meets the equilibrium curve. It is cooled in an exchanger, enters the next bed at a lower temperature (where equilibrium is higher) and climbs again. With double absorption the SO3 is removed after bed 3, so the last bed starts from fresh SO2/O2 and equilibrium no longer limits the total.
Kinetics. Along the bed the extent follows dξ/dτ = k(T) (ξeq(T) − ξ) with τ = Vbed/F (bed volume taken from the Blender mesh, flow at 0 °C), an Arrhenius k with Ea = 90 kJ/mol and a smooth switch-on near 400 °C for the molten-salt catalyst. This is a deliberately simple effective rate, not a fitted rate law of a particular catalyst.
Honest simplifications. Constant heat capacity (33 J/mol/K) and constant ΔH; no pressure drop, no intraparticle diffusion, no radial gradients; interstage coolers and the absorber are ideal (complete SO3 removal); the temperature limits (about 410 and 620 °C) are typical, not data of a particular plant. The rate constant is tuned to give realistic bed outlets (about 66 % after bed 1, about 99.9 % overall with double absorption), not measured. Mass and volumes are illustrative round values.
Checks. (1) The van 't Hoff slope of the equilibrium fit equals the reaction enthalpy from formation data; (2) sulfur and oxygen atoms and the enthalpy balance close in every bed; (3) a bed with unlimited catalyst ends where an independent root-find of the adiabatic line meets the equilibrium curve, and the isothermal limit reproduces the exact exponential; (4) the catalyst volumes integrated from the GLB equal the annulus formula.