Fractional distillation: a tray column built from the McCabe-Thiele stages

Each tray is one equilibrium stage; change volatility, purity and reflux and watch the column grow, shrink and pinch.

Switch to 2D

Presets

Playback

Mixture and column

Camera

Layers

Quality

Model check

The science

What you are looking at

A glass-shell tray column with the plant around it: feed tank and pump on the left, a reboiler (kettle) at the bottom, a condenser and reflux drum on a steel frame at the top, and tanks for distillate and bottoms. The number of trays you see is the number of equilibrium stages the model needs for your settings (at most 28 are drawn; longer columns are drawn compressed, every k-th stage). On each tray the liquid is coloured by its light-component fraction x (amber = heavy-rich, cyan = light-rich); bubbles rising between trays are the vapour, coloured by its fraction y; drops in the alternating downcomers are the liquid running down. The feed pipe enters at the feed stage. The glow of the reboiler follows the boil-up V/F.

Model (identical to the 2D page)

Binary mixture with constant relative volatility α: the vapour in equilibrium with liquid x is y = αx / (1 + (α−1)x). With constant molar overflow the balance between stages is a straight line: rectifying section y = R/(R+1)·x + xD/(R+1); stripping section through (xB, xB) and the feed intersection (saturated-liquid feed, q = 1, total condenser). Stepping between the equilibrium curve and the operating lines from the top counts the ideal stages; the stage where x first drops below zF is the feed stage.

Limits

At total reflux the stairs hug the diagonal and give the fewest stages, Fenske’s Nmin = ln[(xD/(1−xD))((1−xB)/xB)] / ln α. As R falls toward Rmin = (xD − y*)/(y* − zF) (y* = vapour in equilibrium with the feed) the stairs squeeze into the pinch at the feed point and the stage count diverges; below Rmin the separation is impossible with any number of trays. Higher reflux buys fewer trays at the price of more energy: the boil-up is V = (R+1)D, with D/F = (zF − xB)/(xD − xB).

Honest simplifications

Ideal binary mixture, constant α and equimolar overflow, saturated-liquid feed, 100 % stage efficiency, no pressure drop, no heat loss. Real columns need more trays (typical tray efficiency 50–80 %), most mixtures are multicomponent or non-ideal (azeotropes), and crude-oil fractionation is a multicomponent problem; this is a binary teaching model. Bubbles, drops and flow speeds are illustrative (not a hydraulic model: no flooding, weeping or entrainment), and the plant pipework is schematic.

Checks run in the page

  • Three closed-form checks of the 2D page: stair-step count at total reflux equals ceil(Fenske Nmin); stairs stall at 0.97·Rmin and finish at 1.05·Rmin; the stripping-line slope from geometry equals L′/V′ from an independent material balance.
  • The composition drawn on every tray (liquid colours read back from the GPU instance buffer and decoded) matches the stage compositions; every tray satisfies the equilibrium relation; x falls monotonically down the column; the overall balance D·xD + B·xB = F·zF closes; the top vapour equals xD.
  • Scene geometry: equal tray spacing, alternating downcomer sides, the feed pipe at the feed-stage tray, and the first and last drawn trays being the first and last stage.

Credits

Blender 5.2 plant model (glass column, brass bubble-cap trays, condenser, drum, reboiler, tanks) with Cycles-baked metal textures; trays, liquids and bubbles are instanced in Three.js r160.

Loading model...
Loading Blender model...
McCabe-Thiele diagram (y vs x)
Composition down the column
Stages needed vs reflux ratio
Energy: boil-up vs reflux ratio
Made with 🟠 Blender · Three.js