Phosphate Ore Flotation Bank in Side View (2D): Kinetics, Froth Depth, Grade and Recovery

Side schematic of a bank of froth flotation cells separating apatite from quartz and dolomite: the same kinetics, mixed-cell cascade, entrainment and checks as the 3D page.

Switch to 3D

Presets

Playback

Parameters

Camera

Layers

Quality

Model check

The science

What you see. A row of mechanical flotation cells separates phosphate mineral from waste rock. Ground ore (apatite, quartz and dolomite) is stirred into a water slurry with a fatty-acid collector; air bubbles rise from the impeller, the collector makes apatite stick to them, and the loaded froth overflows into the launder while the rest passes to the next cell. The cell, impeller, motor and walkway are Blender models cloned for each cell; the froth turns green where it is rich in apatite.

Kinetics. Each mineral floats at its own first-order rate, dR/dt = k (R∞ − R), with k = P θ Sb Rf. Sb = 6 Jg/db is the bubble surface area carried per second (a typical cell has 20 to 100 per second), θ = C/(K + C) is the Langmuir coverage of the collector (the depressant lowers it for dolomite), Rf = exp(−hf/λ) is the share of attached particles that survive a froth of depth hf, and P is the floatability of the mineral. For a bank of N perfectly mixed cells with residence time τ each, the recovery is R = R∞(1 − (1 + kτ)−N).

Entrainment and grade. A little water always rises with the froth and carries fine gangue with it: Rw = 0.05 Jg e−hf/0.2 of the feed water, and each fine mineral is recovered in proportion. The product grade follows from the mass balance of the three minerals, using the P2O5 content that comes from the formula of fluorapatite (42.2 %) and the MgO of dolomite (21.9 %). Deeper froth gives a cleaner product but a lower recovery, more collector floats more of everything, and dolomite (the hard part of sedimentary phosphate) needs a depressant.

Honest simplifications. Perfect mixing in each cell, no short-circuiting; one first-order rate per mineral (real ores have a fast and a slow fraction and a size distribution); the floatability and froth constants are chosen to give plausible trends and are not data for a real ore; the froth is drawn 2.5 times thicker than real and the bubbles several times larger so they can be seen; no pulp density, pH or water chemistry; the throughput is a rough volume estimate. Educational physics for trends, not a plant design.

Checks. (1) Marching the mass balances of the cell bank to steady state equals the closed form for N mixed cells; (2) Runge-Kutta batch flotation equals 1 − e−kt and the half-time ln 2/k; (3) the theoretical P2O5 and MgO contents follow from atomic masses and the P2O5 mass balance closes; (4) the cell diameter, height and impeller read from the GLB triangles match the modelled sizes and set the volume.

Loading model...
Loading Blender model...
Cumulative recovery of each mineral along the bank
Grade against recovery (residence time sweep)
Effect of collector dose