Phosphogypsum Stack in Section (2D): Bishop Slip Circle, Water Table and Reclamation

Cross-section of a stacked phosphogypsum fill: the same Bishop slip-circle search, Dupuit water table, drainage and checks as the 3D page.

Switch to 3D

Presets

Playback

Parameters

Camera

Layers

Quality

Model check

The science

What you see. A cut-away of a phosphogypsum stack: the by-product of phosphate fertiliser is piled in lifts (stages) with benches between them. The blue region is the water table inside the fill, the coloured shape is the most dangerous circular slip surface that the page finds, and the dump truck, decant pond and survey markers are Blender models that give the scale. Change the lift height, slope, water level, drainage and the strength of the fill and watch the factor of safety.

Limit equilibrium. The sliding mass is cut into vertical slices. Bishop's simplified method gives the factor of safety FS = Σ[(c'b + (W − ub) tanφ') / mα] / ΣW sinα with mα = cosα + sinα tanφ' / FS (iterated until FS stops changing). W is the slice weight (moist above the water table, saturated below), u the pore pressure at the base of the slice, c' and φ' the effective cohesion and friction angle. FS is the ratio of resisting to driving moment about the circle centre; below 1 the slope fails, building codes ask for about 1.3 to 1.5. A grid of circles is searched and the best one is polished by a pattern search.

Water. Steady seepage toward the toe through a long fill follows the Dupuit parabola h² = h0² x / L, so the water table is highest at the back and meets the toe. Below it the pore pressure is hydrostatic. Reclamation drainage is modelled as lowering the back water level by up to 70 %. Water raises FS-reducing pore pressure and the weight, which is why failures happen after rain or when a pond is left on top.

Honest simplifications. Plane strain (a long stack), one homogeneous fill that also forms the foundation to 25 % of the height (a real stack sits on a liner, a drainage layer and soil with their own strengths); circular surfaces only; hydrostatic pore pressure below the line (no flow-net correction, no excess pore pressure from loading); no earthquake, no erosion, no rainfall infiltration model; phosphogypsum also carries radium and fluoride, which is the reason stacks are capped and reclaimed, but that is not modelled here. The default strengths are plausible textbook-style values, not data for a particular stack. Educational limit-equilibrium physics, not a design or safety calculation.

Checks. (1) The search reproduces Taylor's stability number 0.191 for a 60 degree undrained slope; (2) the slice weights equal the independent shoelace area of the sliding mass times the unit weight; (3) the Bishop equation is satisfied at the returned FS and the circle is no safer than the best planar wedge (Culmann); (4) the Dupuit flux is constant along the stack and the truck, pond and reference block read from the Blender GLB have their real sizes.

Loading model...
Loading Blender model...
Factor of safety against outer slope angle
Factor of safety against water level
Factor of safety against number of lifts