This is a top-down cross-section of the reaction vessel. Polar solvent molecules carry a permanent dipole (drawn as short needles). A 2.45 GHz microwave field flips direction ~4.9 billion times per second (shown here hugely slowed down for legibility); each flip drags every dipole into alignment, and the internal friction of that rotation is dissipated as heat throughout the whole volume at once — dielectric heating:
P_v = 2π f ε0 εr" E² (volumetric power density)
εr" = εr' · tanδ (dielectric loss factor)
dT/dt = k1·P(power,tanδ) − k2·(T − T_amb) [microwave: fast, uniform]
dT/dt = k3·(T_bath − T) [oil bath: slow, wall-limited]
A conventional oil bath instead has to conduct heat inward from the vessel wall — slower, and it plateaus near the bath temperature; the outer ring of molecules runs hotter than the core. Reaction rate follows the Arrhenius equation:
k(T) = k_ref · exp[ (Ea/R)·(1/T_ref − 1/T) ]
dX/dt = k(T)·(1 − X) (pseudo first-order conversion)
- Magnetron power — sets how much energy the field couples into the liquid per second (microwave mode only; in oil-bath mode it's disabled since bath temperature, not wattage, sets the ceiling).
- Solvent / tanδ — how strongly a solvent absorbs microwaves, and also how far each dipole's rotation lags the field (lag angle = arctan(tanδ)): toluene barely heats or lags; ethylene glycol absorbs strongly and lags heavily.
- Activation energy — a higher Ea makes the rate constant far more temperature-sensitive, which is why microwave's rapid, higher peak temperatures shorten reaction times so much more than a proportional temperature rise would suggest.
- Drag on the diagram to tilt/rotate the view; the strip chart below tracks temperature, conversion and rate constant live.
- This mechanic is Green Chemistry Principle #6 (energy efficiency) in action: microwave-assisted organic synthesis (MAOS) routinely cuts multi-hour reflux reactions to minutes, because heat goes directly into the reacting molecules instead of first heating glassware and bath oil.