Presets
Playback
Parameters
Camera
Layers
Quality
Model check
The science
What is modelled
A convoy of trucks, medical vehicles and buses drives a 2 km road (shown folded into four legs and three hairpin turns) to a safe zone. Each driver follows the vehicle in front with the Intelligent Driver Model (IDM), a standard car-following equation from traffic engineering. The road is a ring: a vehicle that reaches the safe zone is counted and re-enters at the start, so the density stays constant. A checkpoint limits the speed to 6 m/s in a zone of 230 m, and the lead vehicle can be braked to a stop to create a shock wave.
Equations
- Acceleration of a vehicle with speed v, bumper gap s to the leader and closing speed Δv:
a = amax [1 − (v/v0)4 − (s*/s)2]with the desired gaps* = s0 + v T + v Δv / (2 √(amax b)). Heres0 = 3 m,amax = 1.5 m/s²,b = 2 m/s²(comfortable braking),T = 1.2 s(time headway), and every vehicle is 9 m long. - Equilibrium (all gaps equal, no relative speed):
1 − (v/v0)4 = ((s0 + vT)/s)², giving a speedve(s)and a flowQ = ve / (s + length)per lane. This curve is the fundamental diagram in the first graph. - Free road:
dv/dt = a (1 − (v/v0)4)has the exact solutiont = v0/(2a) (atanh u + atan u)withu = v/v0. - Checkpoint: for positions from 80 m before the checkpoint to its end the desired speed is
min(v0, 6 m/s). The best flow the zone can carry is the maximum ofve(s)/(s + length)withv0 = 6 m/s, which is the capacity shown in the readout. - Weather multiplies the desired speed (1, 0.72, 0.55), lengthens the headway (1.2, 1.6, 2.0 s) and softens acceleration and braking (1, 0.8, 0.6). Integration uses a 0.05 s step with a trapezoidal position update.
Checks run in the page
- Free-road acceleration time against the exact integral.
- An evenly spaced ring at the equilibrium speed stays there and carries the analytic flow.
- No collisions and no overtaking through four hard stops of the lead vehicle.
- Queue discharge through the checkpoint against the equilibrium capacity of the 6 m/s zone.
- Length of the Blender vehicles and of the road polyline against the numbers the model uses.
Honest simplifications
- The parameters are textbook values for ordinary traffic. Real evacuation convoys, army trucks, buses and ambulances behave differently, and drivers in an emergency do not follow one law; the weather factors are plausible multipliers, not measurements.
- One lane, no overtaking, no curves slowing the vehicles (the hairpins are only drawn: speed does not depend on the bend), no hills, no breakdowns and no reaction delay. The ring road is an idealisation; the real destination would take vehicles out of the system.
- The checkpoint is a speed limit, not a queue of vehicles being inspected one by one, so the capacity reported is that of a moving zone.
- The model has a known weakness: the IDM is collision-free but can produce unrealistically strong braking (limited here to 9 m/s²) when a vehicle is very close.
- This is an educational traffic-flow demonstration, not a planning tool.
What to try
- Raise the number of vehicles until the average speed collapses and a red stop-and-go band appears in the space-time diagram.
- Press "Brake lead vehicle" in a dense column and watch the wave travel backwards while the cars drive forwards.
- Compare Sunny with Fog at the same column speed: the equilibrium flow drops because the headway grows.
Loading model...
Loading Blender model...