Профілактика інфекції гемодіалізного катетера — vascular access hierarchy, exit-site care, and antimicrobial lock strategy for reducing catheter-related bloodstream infection
Every hemodialysis patient needs reliable vascular access delivering 300–500 mL/min of blood flow, three times a week, for years. Three access types exist — arteriovenous fistula (AVF), arteriovenous graft (AVG), and central venous catheter (CVC) — and the KDOQI (Kidney Disease Outcomes Quality Initiative) Vascular Access Guidelines rank them in that order specifically because infection risk, and overall mortality risk, rises sharply as you move from fistula to graft to catheter.
An arteriovenous fistula is the patient's own vein, surgically connected to an artery and allowed to mature (arterialize) over 6–12 weeks. Because it is autologous tissue with an intact endothelial lining, needled percutaneously at each treatment and left otherwise closed between sessions, it presents very little surface for bacterial colonization. An arteriovenous graft uses synthetic (or biologic) tubing to bridge artery and vein — still needled percutaneously, still no permanently indwelling foreign lumen exposed to the bloodstream between treatments, but the prosthetic material is somewhat more colonization-prone than native vein.
A central venous catheter is fundamentally different: it is a permanently indwelling foreign tube whose internal lumen sits in continuous contact with blood, and whose external hub is repeatedly opened, connected, and disconnected at every single dialysis session — often three times a week, every week, for as long as the catheter remains in place. Each connection event is an opportunity for skin flora or hub-contaminating organisms (commonly Staphylococcus aureus, coagulase-negative staphylococci, and Gram-negative organisms) to enter the bloodstream directly. This structural difference — an open, handled, indwelling conduit versus a closed, needled, autologous or prosthetic vessel — is the core reason catheters carry substantially higher infection risk than fistulas or grafts at essentially every dwell duration.
The clinical guidance is not merely a preference — it is a risk-ordered hierarchy: AV fistula is preferred whenever anatomically feasible, AV graft is the next best long-term option, and a central venous catheter should be viewed as the least preferred long-term access specifically because of its comparatively higher infection risk, alongside its association with more frequent thrombosis and lower blood flow adequacy.
Catheters remain clinically necessary in several situations: emergent dialysis initiation before a fistula or graft has matured, a "bridge" while a newly placed fistula matures, patients with exhausted upper-extremity vessels, or those for whom surgical access creation carries prohibitive risk. The prevention strategy in these cases is not to avoid catheters altogether — it is to minimize the time spent on a catheter, apply rigorous infection-prevention protocols while the catheter remains in place, and pursue conversion to permanent access as soon as it becomes feasible (covered in Stage 5).
Not all catheters carry equal risk. A non-tunneled (acute) catheter is inserted directly through the skin into the vein with no subcutaneous course, intended for days-to-weeks of use. A tunneled cuffed catheter is threaded under the skin for several centimeters before entering the vein, anchored by a Dacron cuff that promotes fibrous tissue ingrowth. This tunnel and cuff create a physical and biological barrier against organisms migrating from the skin exit site toward the bloodstream, which is why tunneled cuffed catheters carry meaningfully lower infection risk than non-tunneled catheters when longer-term catheter use is unavoidable.
A tunneled cuffed catheter's subcutaneous tunnel (typically 8–12 cm) separates the skin exit site from the venotomy site where the catheter actually enters the vein. Bacteria colonizing the exit site must migrate the full tunnel length along the catheter surface to reach the bloodstream — a much longer and more difficult path than the direct, unimpeded route of a non-tunneled catheter, where the entry point into the vein is essentially at the skin surface. The Dacron polyester cuff, positioned partway along the tunnel, further reinforces this barrier: host fibroblasts grow into the cuff over 2–4 weeks, mechanically sealing the tunnel tract and providing an additional zone that resists ascending bacterial migration.
Because of this anatomic protection, guideline bodies recommend that whenever a catheter must be used for more than a very short bridging period, a tunneled cuffed catheter should replace a non-tunneled catheter as soon as practical — non-tunneled catheters are reserved for true short-term or emergency circumstances.
Infection risk with any catheter is usually expressed as an incidence rate — infections per 1000 catheter-days — precisely because risk accumulates with time in place rather than occurring as a single fixed probability. Two mechanisms drive this cumulative exposure:
• Dwell time: every additional day the catheter remains in the bloodstream is another day during which biofilm can mature on the internal and external catheter surfaces, and another day during which the exit site can become colonized.
• Dialysis frequency (connection/disconnection events): each hemodialysis session requires breaking the closed system to connect blood lines to the catheter hub and disconnect afterward. Standard thrice-weekly dialysis means roughly 150+ hub-manipulation events over a single year of catheter dependence — each one a discrete opportunity for extraluminal or intraluminal contamination if aseptic technique lapses.
Together, these two factors mean that the same catheter type carries rising cumulative infection probability the longer it stays in place and the more frequently it is accessed — reinforcing why minimizing total catheter time (Stage 5) is itself a prevention strategy, not just a logistical goal.
Whatever catheter type is in place, the single most consistently emphasized bedside prevention measure is disciplined, standardized care at the catheter exit site and hub every time the catheter is accessed. Guidelines from the CDC, KDOQI, and dialysis-specific infection prevention bodies converge on the same core elements: antiseptic exit-site cleaning at each session, a topical antimicrobial or antiseptic ointment/dressing at the exit site, and strict aseptic no-touch technique for every connection and disconnection.
A standardized exit-site care protocol, performed by trained dialysis staff at the start and end of every hemodialysis session, generally follows this sequence:
1. Hand hygiene and don clean gloves (mask for patient and staff during connection/disconnection, per many unit protocols, to reduce droplet contamination of the sterile field). 2. Remove the old dressing and inspect the exit site for erythema, drainage, tenderness, or crusting — early signs of exit-site infection that warrant escalation. 3. Cleanse the exit site and surrounding skin with an antiseptic — chlorhexidine gluconate greater than 0.5% in alcohol is generally preferred over povidone-iodine for its more rapid onset and more persistent antimicrobial activity — using a consistent center-outward technique. 4. Cleanse the catheter hub and clamps thoroughly before every connection to the blood lines and after every disconnection, since the hub is the most frequently touched, most direct route into the bloodstream. 5. Apply a topical antimicrobial ointment or antimicrobial-impregnated dressing at the exit site if included in the unit protocol. 6. Apply a clean, occlusive, sterile dressing and secure the catheter to reduce mechanical trauma and tension at the exit site, which itself predisposes to microtrauma and colonization.
Because the catheter hub is disconnected and reconnected at every single treatment, aseptic no-touch technique during this step is considered just as critical as exit-site cleansing itself — a single lapse in hub hygiene at any one session can seed a bloodstream infection regardless of how well the exit site has been cared for on other days.
The evidence base for exit-site care emphasizes consistency of a standardized protocol across every staff member and every session more than any single "best" antiseptic agent. Unit-wide checklists, staff competency training, and observed technique audits are used to ensure that the same rigorous sequence is followed regardless of which technician or nurse is performing the connection — because catheter-related bloodstream infection risk is driven by the weakest link in a repeated, high-frequency process, not by the average quality of care.
Between dialysis sessions, the fluid left inside each catheter lumen — traditionally a heparin-only "lock" to prevent clotting — sits stagnant in direct contact with the catheter's internal wall for up to two or three days. This stagnant interval is exactly when intraluminal biofilm forms and matures. Replacing a plain heparin lock with an antimicrobial or antiseptic lock solution in high-risk catheter patients has been shown to reduce catheter-related bloodstream infection by directly suppressing bacterial growth and biofilm formation within the lumen during this dwell interval.
A conventional heparin-only lock serves purely a mechanical purpose: preventing the catheter lumen from clotting between treatments so that blood flow can be re-established rapidly at the next session. It provides essentially no antimicrobial effect. Bacteria that adhere to the catheter's internal surface — whether introduced at a prior connection event or migrating from a colonized hub — can proliferate and organize into a protective biofilm matrix throughout the 48-to-72-hour interdialytic interval when the lumen sits undisturbed. Biofilm-embedded organisms are markedly more resistant to systemic antibiotics and to the host immune response than free-floating (planktonic) bacteria, which is part of why catheter-related bloodstream infections can be difficult to clear without catheter removal once biofilm is established.
An antimicrobial or antiseptic lock solution is instilled into each catheter lumen at the end of dialysis, in place of or in addition to the anticoagulant lock, specifically to suppress microbial growth during the dwell interval before the next session. Several categories are used across different units and guideline frameworks:
• Antibiotic locks: a concentrated antibiotic solution combined with an anticoagulant, instilled to directly kill organisms within the lumen. Typically reserved for patients with recurrent catheter-related bloodstream infection given concerns about promoting antimicrobial resistance with routine broad use.
• Antiseptic locks: agents such as taurolidine-based solutions act through non-antibiotic antimicrobial mechanisms, which may reduce resistance-selection concerns relative to antibiotic locks while still suppressing biofilm formation.
• Citrate locks: in addition to anticoagulant properties, citrate has some intrinsic antimicrobial activity at higher concentrations and can serve a dual mechanical/antimicrobial role.
The common thread across all these approaches is the same clinical logic: because the catheter lumen is the reservoir where organisms multiply undisturbed between sessions, treating that reservoir directly — not just the exit site or the hub — closes an infection-prevention gap that exit-site care alone cannot address.
Antimicrobial or antiseptic lock solutions are recommended specifically for high-risk catheter patients — for example those with a history of recurrent catheter-related bloodstream infection — rather than as a routine, universal practice for every catheter patient, reflecting a balance between infection-prevention benefit and concerns such as antimicrobial resistance and lock-related toxicity.
Every prevention measure covered so far — choosing a tunneled over a non-tunneled catheter, disciplined exit-site care, antimicrobial lock solutions — reduces but does not eliminate the elevated infection risk inherent to any catheter. Because the risk differential between catheters and permanent access (AV fistula or AV graft) is substantial at essentially any dwell duration, the single most effective long-term prevention strategy is minimizing total time spent catheter-dependent by actively planning and expediting conversion to permanent access whenever clinically feasible.
Because cumulative infection risk rises with every additional day of catheter dwell (Stage 2), the most effective single intervention is not a technique performed at the bedside during dialysis — it is the upstream clinical decision to treat every catheter as temporary from the moment it is placed. Best-practice pathways call for a vascular access referral and surgical evaluation for AV fistula or AV graft creation to be initiated at, or very soon after, catheter placement, rather than waiting until an infection or other complication forces the issue. Early referral allows fistula maturation (typically 6–12 weeks, sometimes longer) to proceed in parallel with catheter-dependent dialysis, so that the moment the fistula or graft is cannulation-ready, the catheter can be removed promptly rather than continuing "just in case."
A typical access-conversion pathway, applied whenever a patient is catheter-dependent, includes:
1. Vascular access team referral at or shortly after catheter placement — not deferred until a complication arises. 2. Vessel mapping (ultrasound assessment of arterial and venous anatomy) to identify feasible fistula or graft sites, prioritizing native fistula creation whenever suitable vessels exist. 3. Surgical creation of the AV fistula or AV graft, timed so maturation overlaps with ongoing catheter-based dialysis rather than following it sequentially. 4. Serial maturation assessment (clinical exam and ultrasound flow/diameter criteria) to confirm the access is ready for cannulation. 5. Planned catheter removal promptly once the fistula or graft is successfully cannulating for dialysis — closing the highest-risk chapter of the patient's access history as soon as it is safely possible.
This pathway reframes catheter infection prevention: rather than viewing the catheter as a fixed feature of a patient's dialysis care to be managed indefinitely, every layer of care — from access-type selection, to catheter-specific choice, to exit-site technique, to lock solutions — is understood as bridging toward the definitive prevention strategy of getting the patient off the catheter altogether.
Because a central venous catheter carries substantially higher infection risk than a fistula or graft at essentially any dwell time, the highest-leverage prevention action a care team can take is not a better lock solution or a better dressing — it is shortening the total number of days any given patient spends catheter-dependent by treating fistula/graft conversion as an active, time-sensitive priority rather than a background goal.