1. Zig-zag ramp. A solid steel sphere rolling without slipping accelerates at a = g(sinθ − Crrcosθ) / (1 + I/mr²), I = 2/5 mr². At each U-turn on a landing pad the ball loses about 4% of its energy per bend, so a zig-zag ramp delivers less speed than a straight one of the same drop.
2. Dominoes. The ball hits domino 1 with an impulse J = (1+e)v / (1/m + hₔ²/I). Each domino is a rigid block of inertia I = M(h²+t²)/3 pivoting on its front-bottom edge, so it only falls if the impact tips it past atan(t/h). Neighbours touch when sin(θi − θi+1) = (p&cos;θi+1 − t)/h; the chain speed is an output of the model.
3. Lever catapult. The last domino strikes the short arm: ω = J·a / I. Gravity decelerates the beam and at the stop the ball leaves tangentially at v = ωL₂. Move the funnel or change L₂ and the 0.5 g ball misses: this is a real tolerance problem.
4. Funnel. The ball moves on a cone of half-angle 70° with Lagrangian L = m(s'² + s²sin²α φ'²)/2 − m g s cosα: angular momentum keeps it circling while friction makes it spiral inwards, then it drops 45 mm onto the bell.
Energy reality check. The dominoes carry well under a millijoule, so the lever only tosses the ball a few centimetres; most of the ramp's energy is lost to rolling friction, spin and collisions.
Simplifications: planar rigid bodies, point contacts with fixed restitution, no sliding friction between dominoes, no drag on toppling dominoes, a hard stop for the lever, instant bends on the landing pads. Parts were modelled and wood-baked in Blender.