1. Ramp. A solid steel sphere rolling without slipping has a = g(sinθ − Crrcosθ) / (1 + I/mr²) with I = 2/5 mr², so only 5/7 of the slope's pull accelerates it; the rest spins the ball up.
2. Domino 1. The ball hits the first domino at height r. An impulse J with restitution e gives J = (1+e)v / (1/m + hₔ²/I), then ω = J·hₔ/I (angular momentum about the pivot is conserved by construction). Each domino is a block of inertia I = M(h²+t²)/3 pivoting on its front-bottom edge: Iα = Mg(h&sin;θ/2 − t&cos;θ/2), so it only falls if the hit lifts it past the tipping angle atan(t/h).
3. Chain. Domino i meets i+1 when sin(θi − θi+1) = (p&cos;θi+1 − t)/h (p = pitch). A new impulse passes momentum on, then the pair leans together. The chain speed (about 0.8 m/s here) is an output, not an input.
4. Lever. The last domino's tip strikes the short arm; ω = J·a / Ibeam+ball. Gravity decelerates the beam, and at the stop it throws ball 2 with v = ωL₂. A longer long arm raises the speed only until the swing no longer reaches the stop: tune it.
5. Flight & bucket. Ball 2 follows an RK4 projectile with quadratic air drag. If it lands in the scoop its angular momentum about the hinge tips the counter-weighted scoop, a gate opens and ball 3 rolls down the 20° chute to the bell.
Energy reality check. The dominoes carry only a fraction of a millijoule, so the lever merely tosses a 0.5 g ball a few centimetres; the ramp's 90 mJ is mostly lost to rolling friction, to the ball's own spin and to the many collisions.
Simplifications: planar rigid bodies, point contacts with a fixed restitution, no sliding friction between dominoes, no drag on toppling dominoes, a hard stop for the lever. Ball and bell sprites and the wood grain were rendered in Blender.