Cell-Free Protein Synthesis: ATP Regeneration and the Energy Budget

A tube rack on a UV lamp: the liquid glows green as protein accumulates. Yellow bars show ATP, blue bars creatine phosphate. Drag to orbit.

Switch to 2D
Controls

Presets

Parameters

Quality

Camera

Model checks

The science

Cell-free protein synthesis needs a constant supply of ATP. A cell-free extract (TX-TL) contains ribosomes, tRNAs and enzymes, but no metabolism to keep ATP high. Every amino acid added costs about four high-energy phosphate bonds (ATP and GTP), so a 250-residue protein needs roughly 1000 ATP-equivalents. A typical reaction contains only about 1.5 mM ATP, so the energy has to be regenerated: here creatine kinase moves a phosphate from creatine phosphate (CP) to ADP, ADP + CP → ATP + creatine.

Equations. The adenylate pool is conserved, ATP + ADP = A. Regeneration vreg = kreg · CP/(KCP + CP) · ADP/(KADP + ADP) needs both ADP and CP. Protein synthesis vsyn = ksyn T ATP/(Ks + ATP) is saturable in ATP; the translation machinery decays, dT/dt = -T/τ, and phosphatases burn ATP wastefully, vw = kw ATP. Protein made is Y micrograms per mM of ATP consumed in synthesis (27 µg/mL per mM, a GFP-sized protein at about 1000 ATP-equivalents per molecule), so the absolute ceiling is Y(ATP0 + CP0): 30 mM CP can give at most about 0.85 mg/mL.

What limits the yield. Three things compete: the finite energy store (CP), the lifetime of the machinery (τ) and the wasteful drain (kw). With little CP or a weak enzyme the ATP collapses within minutes; with a phosphatase-rich extract a large share of the energy never reaches the ribosome (see the efficiency readout); with a short-lived machinery the extra CP is unused. Three tubes run side by side: no regeneration, your settings, and your settings with the phosphatases inhibited.

Simplifications. Lumped kinetics with illustrative constants (not a fitted model of a specific extract), no inhibitory phosphate accumulation, no pH drop, GTP and amino acid supplies not limiting, a single protein and a single phosphatase activity. The system is stiff, so the integrator caps its internal step at 0.04 min. Checks: balance of ATP + CP + consumed energy; first-order ATP decay against its closed form; the initial Michaelis-Menten rate; the energy ceiling (protein → Y × usable energy when waste and decay are off); step-size independence; monotonic response to more creatine phosphate.

Loading model...
Loading Blender model...
-
-
Made with 🟠 Blender · Three.js