3D Wheat Field in the Wind

A field of wheat where every stalk is a springy cantilever driven by the wind inside the crop: watch gusts roll across the field, tune the plant and see when the stems lodge.

Switch to 2D

Presets

Playback

Wind

Plant

Field and view

Camera

Layers

Quality

Model check

The science

A wheat stalk is a slender cantilever clamped at the ground. Its bending stiffness is EI, where I = π/64 (D4 - d4) is the second moment of area of the hollow stem. A force at the tip bends it by δ = F L3/(3EI), a uniformly distributed load q by δ = q L4/(8EI). One stalk therefore behaves like a spring with k = 3EI/L3 and an effective mass meff = Mear + 0.2427 mstem (first mode), so its natural frequency is f0 = (1/2π) √(k/meff), about 1 Hz for a normal stalk. The exact Euler-Bernoulli frequency equation with a tip mass, 1 + cosβL coshβL + (M/m)βL (cosβL sinhβL - sinβL coshβL) = 0, is used as an independent check.

Wind inside a crop decays with depth. Above the canopy the wind follows the logarithmic law U(z) = (u*/κ) ln((z - d)/z0) with κ = 0.41, displacement height d = 0.67 h and roughness length z0 = 0.1 h; inside it falls off as U(z) = Uh exp(-a(1 - z/h)). The quadratic drag on the ear is Fe = ½ ρ Cd Ae |u - v| (u - v), and the stem and leaves add Fs = ½ ρ Cd ws L |uc - v/2| (uc - v/2). The equivalent tip force is Fe + (3/8) Fs, and the bending moment at the base is Fe L + Fs L/2.

Every cell of the field carries one such oscillator, with a spring of strength κk joining it to its four neighbours. A gust is a patch of faster air that travels at about 0.7 of the mean wind, so the stalks lean one after another and a visible wave runs across the field (the Japanese honami). Stronger coupling makes the wave broader and faster. If the base moment exceeds σ Z (the bending strength times the section modulus I/(D/2), varying by about 28 % from stalk to stalk) the stem yields: its stiffness drops by 85 % and it keeps a permanent set along the wind. That is lodging, which the model reports as a lodged fraction of the field.

Simplifications, stated honestly. The stalk is linear-elastic with one mode, although at 40 % to 90 % of its length deflection geometry is nonlinear, so large leans are only indicative. The 3 stalks drawn per tuft stand for many plants moving together, and the on-screen number is a sample, not the real 300 to 500 plants per m2. The canopy wind profile is a fixed shape, so shielding and the flow that the lean itself changes are not solved, and the gusts are a prescribed sum of travelling waves, not a turbulence simulation. Leaf flutter, rain loading, stalk-to-stalk collisions and root-lodging in soft soil are left out. Drag coefficients and material constants are representative literature values, accurate to about a factor of 1.5.

Loading model...
Loading Blender model...
Tip deflection of three stalks along the wind (probes 8 m apart: gust travel time)
Wind speed against height: logarithmic above the crop, exponential inside it
Steady-wind deflection and bending-moment ratio against wind speed (lodging at 1)
Made with 🟠 Blender · Three.js