EXPERIMENT 001 / AERODYNAMICS LAB

3D Wind Tunnel Simulator

See the invisible forces of flight. Change the wind, pitch the wing, and watch lift, drag, and airflow respond in a fully interactive 3D experiment.

3DLive airflow scene 6Dynamic metrics WebGPUWebGL 2 fallback

LIVE ENVIRONMENT / TEST CHAMBER

Your interactive wind tunnel

Change the settings and inspect how an instrumented NACA 2412 airfoil behaves.

LIVE SIMULATIONStarting graphics…
Initializing 3D laboratory…
DRAG TO ORBIT · SCROLL TO ZOOM · CLICK A PART TO INSPECT— FPS
Airflow tracers (illustrative) Pressure taps Lift force Drag force

INSTRUMENT READOUT

Real-time flight data

ATTACHED FLOW
Lift force ↑—Vertical aerodynamic force
Drag force →—Resistance along the airflow
Lift coefficient CL—Dimensionless lift measure
Drag coefficient CD—Dimensionless drag measure
Dynamic pressure q—One-half density × velocity²
Reynolds number Re—Based on wing chord

AERODYNAMIC RESPONSE

How lift changes with angle of attack

The curve is recalculated from this experiment's low-order model. Its peak marks the chosen stall threshold.

CₗAoA (°)

01 / DISCOVER

About This 3D Simulation

An interactive way to investigate the forces that hold an aircraft in the air.

This interactive 3D wind tunnel simulator recreates the essential experience of an aerodynamic laboratory. At the centre of a transparent test chamber is a model of a NACA 2412 airfoil, a classic cambered wing section used to demonstrate lift generation. A powered fan assembly, flow-conditioning grille, instrumented wing, and moving air tracers help illustrate what takes place inside a research wind tunnel. You can rotate the camera around the apparatus and inspect individual components instead of viewing the experiment from a single fixed angle.

Real wind tunnels are used to investigate aircraft wings, racing cars, bridges, turbines, sports equipment, and many other objects. Engineers set a controlled airflow speed, mount a test article in the measurement section, and record aerodynamic loads and pressures. The results guide design decisions before a full-size product is built or tested in the field. This virtual experiment focuses on the relationship between airspeed, angle of attack, air density, lift, and drag.

Five interactive settings let you investigate different conditions. Increase airspeed to see how dynamic pressure and aerodynamic forces grow. Rotate the airfoil to explore positive and negative lift, then continue toward the model's stall threshold. Change density to simulate lighter or heavier air. Introduce gentle periodic gusts to see the live readouts vary, or adjust animation speed without changing the underlying physics. Quick presets allow comparisons between normal operation, high-speed flow, and a high-angle condition.

Useful measurements appear alongside the 3D scene, including lift and drag forces, dimensionless coefficients, Reynolds number, and a lift-versus-angle graph. Force arrows provide an intuitive visual explanation, while the transparent chamber makes the fan and pressure taps easier to examine. Camera controls, optional airflow tracers, component information, and a wireframe view support different learning styles.

The numerical model is intentionally educational rather than a high-fidelity computational fluid dynamics calculation. It uses dynamic pressure, an approximate finite-wing lift slope, induced drag, and an illustrative post-stall decline. The animated tracers represent airflow behaviour qualitatively, not a solved three-dimensional velocity field. That distinction makes this tool suitable for learning aerodynamic concepts, exploring trends, and preparing classroom discussions—while avoiding any claim that its output can certify a real aircraft or replace experimental data.

02 / UNDERSTAND

How It Works

The engineering ideas behind the 3D experiment, explained from airflow to aerodynamic stall.

Airflow through the test section

A wind tunnel creates a controlled stream of air around a stationary object. The fan produces flow, while a flow-conditioning grille represents the devices used to reduce large-scale swirl and improve uniformity. The airfoil is mounted inside the test chamber so the surrounding airflow can be studied without moving an entire aircraft. In this simulation, air travels primarily from left to right. The animated dots and streamlines are teaching aids: they bend around the model in a simplified, visually suggestive way rather than following a fluid solver.

Why a cambered airfoil creates lift

The NACA 2412 section has 2% maximum camber located at 40% of its chord and a maximum thickness of 12% of chord. Its curved profile changes how the flow is turned and how pressure develops around the wing. In real aerodynamics, the pressure distribution and the deflection of surrounding air are complementary descriptions of lift. Lift depends on wing shape, angle of attack, airspeed, density, and three-dimensional flow effects. It is not correct to assume that parcels of air going over and under the wing must meet again at the trailing edge.

The force equations

Dynamic pressure is q = ½ ρ V², where ρ is air density and V is airspeed. Lift is approximated by L = q S Cₗ, and drag by D = q S Cᴅ, with S the reference wing area. For this 1.6 m chord and 3.2 m span model, S = 5.12 m². These equations explain why doubling speed ideally multiplies forces by four when the coefficients are unchanged. The display updates force values as the experiment runs; lift may become negative for sufficiently negative angles.

Angle of attack and stall

Angle of attack is the angle between the wing chord and the oncoming airflow. At moderate angles, lift coefficient typically increases with angle. This simulator uses a linear finite-wing approximation with an assumed zero-lift angle of −2°. To demonstrate the principle of stall, its lift curve is deliberately made to decline beyond a positive threshold of 14° and a negative threshold of −14°. Real stall onset, separation pattern, and recovery depend on Reynolds number, wing shape, surface condition, flow history, and many other factors; the chosen thresholds are not measured NACA 2412 performance data.

Drag, Reynolds number, and gusts

Drag combines a baseline profile term, an induced-drag contribution that grows roughly with the square of lift coefficient, and a post-stall penalty. The model uses Cᴅ = Cᴅ₀ + Cₗ²/(π e AR) + stall penalty, with a fixed illustrative efficiency factor e = 0.82 and aspect ratio AR = span/chord = 2. Reynolds number Re = ρ V c / μ compares inertial and viscous effects, using an assumed constant dynamic viscosity of 1.81 × 10⁻⁵ Pa·s. It is displayed for learning but does not modify the coefficients. The gust control adds a periodic speed variation, so instantaneous forces oscillate; it is not a turbulence-resolving model.

Using the results responsibly

Try changing one control at a time to isolate causes. At fixed angle and density, changing speed will mainly affect forces and Reynolds number. At fixed speed, changing incidence will alter lift and drag coefficients. The lift-versus-angle graph is recalculated from the selected model, while arrows show the directions of lift and drag. Pausing freezes animation and gust evolution; changing the animation-speed slider changes how fast simulated time advances, not the aerodynamic laws. For practical aircraft design, use validated wind-tunnel measurements or suitable CFD tools, including uncertainty estimates and properly selected boundary conditions.

03 / EXPERIMENT

How to Use This Simulation

A practical guide to navigating the model and conducting your own tests.

01

Explore the chamber

Drag to orbit around the scene. Scroll or pinch to zoom, and right-drag to pan on desktop. Select a visible component for a description; use Reset camera to restore the starting angle.

02

Control the flow

Use Airspeed, Angle of attack, and Air density to set the test conditions. Change one value at a time and monitor the live force readouts and plotted lift coefficient.

03

Test the limits

Select Stall onset, or increase the angle above 14°. Look for the fall in modeled lift coefficient and the drag increase. Use High speed to compare the force increase at a fixed wing angle.

04

Inspect the details

Toggle Flow tracers to hide or display illustrative particles and streamlines. Switch Wireframe on to inspect the wing mesh. Click the airfoil, fan, grille, or pressure taps for more context.

05

Pause and compare

Use Pause to freeze the fan, tracer movement, and gust clock. Adjust Animation speed to study motion at a different pace. Press Space outside an input to pause or resume.

06

Repeat your experiment

Press Reset experiment to restore normal-flight settings, enable tracers, disable wireframe, and restart the simulation. Read the model notes before interpreting results quantitatively.

04 / ANSWERS

Frequently Asked Questions (FAQ)

Ten detailed answers to common questions about wind tunnel tests and wing aerodynamics.

What is a wind tunnel, and what does this 3D simulator demonstrate?

A wind tunnel is an experimental facility that moves air past a stationary model so its aerodynamic behaviour can be investigated under controlled conditions. Real facilities may measure surface pressure, forces, flow velocity, and how the flow separates from a surface. This 3D wind tunnel simulator focuses on a cambered airfoil rather than a full aircraft. You can adjust airspeed, wing angle of attack, and air density while viewing approximate lift, drag, Reynolds number, and an evolving flow visualization. The goal is to show how aerodynamic variables are connected. The visualized tunnel, fan, pressure taps, and tracer particles are educational representations; the software does not perform computational fluid dynamics or reproduce measurements from an actual laboratory.

How does the NACA 2412 airfoil produce lift in moving air?

The NACA 2412 is a cambered airfoil profile whose geometry influences the flow and resulting pressure distribution. When moving air encounters the wing, its shape and angle of attack redirect the flow and establish pressure differences around the surface. Integrating those pressure forces, together with viscous stresses, produces an aerodynamic resultant that can be separated into lift and drag. A positive angle usually increases lift over the normal attached-flow range. The camber means this airfoil can generate positive lift even at a small geometric angle of attack. The simulator represents that tendency by assuming a zero-lift angle near −2°. Actual lift depends on three-dimensional flow, Reynolds number, surface condition, and other test details not resolved here.

What are the main parts of the virtual wind tunnel apparatus?

The virtual apparatus contains a powered fan at the upstream end, an internal flow-conditioning grille, a transparent test section, an instrumented airfoil, and a structural base. In a real wind tunnel, fans establish the overall flow, while screens or honeycombs help remove large turbulent structures and encourage uniform test-section conditions. The model airfoil sits on a support so it can be exposed to the stream at a controlled incidence. Coloured surface markers represent pressure measurement locations, although this simulator does not calculate each tap's pressure. Moving particles provide an intuitive view of the flow direction. Force arrows indicate lift and drag. You can click important components in the 3D view to display further explanatory information.

Why does aerodynamic lift increase when airspeed increases?

Aerodynamic force depends strongly on dynamic pressure, which is half the density of air multiplied by the square of its speed: q = ½ρV². In the standard lift expression L = qSCₗ, the reference wing area S and lift coefficient Cₗ also matter. If density, geometry, and coefficient remain fixed, increasing airspeed from 20 to 40 metres per second multiplies dynamic pressure and lift by four. This is why wind speed is a powerful input in a wind tunnel. Real aerodynamic coefficients may vary with Reynolds number, compressibility, and other factors as speed changes. In this educational model, those secondary effects are not calculated, so the main quadratic relationship is particularly clear.

What is angle of attack, and why can a wing stall?

Angle of attack is the angle between the wing's chord line and the direction of the incoming relative airflow. Increasing it generally increases lift while the flow remains sufficiently attached. Beyond a certain condition, large regions of separated flow may form and lift can stop increasing or decline: this is an aerodynamic stall. A stall is not the same thing as an engine stopping, and it is not determined by one universal aircraft speed. The simulator deliberately sets a positive stall threshold at 14° to illustrate the trend. In reality, the onset varies with wing geometry, Reynolds number, surface roughness, dynamic manoeuvres, and even the definition of stall used in testing. The displayed threshold must not be treated as certified airfoil data.

What is the difference between lift, drag, and their coefficients?

Lift and drag are components of the aerodynamic force acting on an object. Lift is perpendicular to the incoming airflow, while drag acts parallel to it in the direction the flow pushes the model. Their values are measured in newtons. Lift coefficient Cₗ and drag coefficient Cᴅ are dimensionless numbers that normalize these forces by dynamic pressure and reference area. That normalization makes aerodynamic behaviour easier to compare at different speeds and sizes, within the limits of similarity. In this simulator, force readouts change when you alter airspeed or density, even if the coefficients remain unchanged. Angle of attack changes the modelled coefficients themselves. The lift-to-drag ratio can help explain efficiency, but it is not a complete aircraft performance measure.

How can I perform a useful experiment with the interactive controls?

Start with the Normal flight preset and examine the lift, drag, and dynamic pressure readouts. Increase airspeed while leaving the other settings unchanged, and compare how much the force values rise. Next, return to the default and slowly increase angle of attack, watching the lift-coefficient curve and the stall indication. Try negative angles to observe how the direction of modelled lift can reverse. Air density provides another straightforward comparison, and the gust control introduces a periodic fluctuation into instantaneous speed. Pause the scene when you want to inspect its components. For meaningful comparisons, change only one parameter at a time and record your settings; remember that these results are illustrative engineering estimates, not laboratory measurements.

What changes when I adjust density, gust intensity, or animation speed?

Air density directly changes dynamic pressure and therefore changes the computed lift and drag forces at a fixed airspeed and coefficient. It also influences Reynolds number because that dimensionless quantity contains density. The Gust intensity slider adds a simple periodic variation around the selected airspeed. This makes instantaneous force measurements oscillate because aerodynamic force depends on speed squared. It is a teaching approximation, not a resolved turbulent flow field. The Animation speed control is different: it changes how quickly the fan, tracer particles, and simulated gust clock advance. It does not change the selected baseline wind speed or the underlying coefficient formulas. The Pause button freezes time-dependent motion and helps when comparing stationary snapshots.

How accurate are the airflow tracers and aerodynamic predictions?

The airflow tracers are a qualitative visual device, not computed particle trajectories from Navier–Stokes equations. Their paths are intentionally stylized to make the general direction of flow and the influence of wing incidence easy to see. Lift is estimated using an approximate finite-wing slope, with a chosen zero-lift angle and a simplified reduction past stall. Drag includes a baseline term, induced drag, and a stall penalty. The model does not resolve detailed boundary layers, compressibility, unsteady separation, wall interference, individual pressure taps, or Reynolds-dependent coefficient changes. For this reason, its numerical results should not be used to design safety-critical equipment. Validated CFD and physical wind-tunnel tests are necessary when accurate engineering predictions are required.

What does Reynolds number reveal about a wind tunnel test?

Reynolds number compares the influence of inertial forces with viscous forces in a flowing fluid. For a wing section, a common definition is Re = ρVc/μ, where ρ is density, V is airspeed, c is chord length, and μ is dynamic viscosity. Two geometrically similar tests with different sizes or speeds can behave differently if their Reynolds numbers differ significantly. The number affects boundary-layer development, transition, separation, and sometimes stall characteristics. This simulator reports Reynolds number using a fixed chord and assumed constant air viscosity, but does not alter its aerodynamic coefficients in response. Matching Reynolds number is one important consideration in real wind-tunnel similarity; Mach number, turbulence level, and test-section effects can matter as well.

Made with 🤖 ChatGPT · Three.js