Assembling the truss…
🛰 Truss controls
The science

Model. A square-section truss (4 longerons, battens, one diagonal per face per bay) clamped to a station. A 3D pin-jointed bar finite-element model solves K u = F. Loads are superposed: a sideways tip force, the inertial load −m a of a thruster burn on every node mass, and a thermal gradient (sunlit side hotter by ΔT) adding E A α θ to each bar.

Closed forms used as checks. EI = E Al w²; tip load δ = P L³/(3EI) + N P d /(2 E Ad sin²φ); thermal bending κ = α ΔT / w, δ = κ L²/2; first frequency ω1 = 1.875² √(EI/(μ L&sup4;)).

Assembly. Capturing a bay of mass m arriving at v at lever arm r gives recoil V = m v/(M+m) and spin ω = μ r v/(I + μ r²), μ = M m/(M+m). The delivery animation is time-compressed.

Struts. Compression members are checked against Euler buckling Pcr = π² E It / a² for a thin tube (2 mm wall). Bars are coloured blue (tension) to red (compression).

Honest simplifications. Linear elastic pin-jointed bars (joint stiffness, slack ignored); steady linear thermal gradient; quasi-static thruster burn; the vibration shown after "Pluck" uses the first-mode frequency (Rayleigh estimate) with a fixed light damping, mode shape taken as the static bending shape; capture is a perfectly inelastic point-mass collision. Real hardware needs far more analysis; deflections are exaggerated for visibility.

Independent checks (run on load, same core as the 2D page):

running…

Truss readout

Length L   mass-
Tip deflection (total)-
P / burn / thermal-
First bending frequency-
Beam theory for P alone-
Max stress / buckling margin-
Capture: recoil V / spin-
-
Drag to orbit, pinch or scroll to zoom. Deflections are exaggerated. Educational structural model.
Made with 🟠 Blender · Three.js