Atmospheric entry: capsule, shock layer and trajectory

Blender-built capsule with an ablative heat shield flying the Allen-Eggers / Sutton-Graves entry of the 2D page, with live g-load, heat flux and wall temperature.

Switch to 2D

Presets

Playback

Entry conditions and replay

Camera

Layers

Quality

Model check

The science

What you are looking at

A blunt, Apollo-class capsule (Blender 5.2 model: spherical ablative heat shield, conical body, windows, thruster pods) falls through the atmosphere on the trajectory computed by the 2D page. Capsule views follow it at full size; the Trajectory view shows the whole path over a planet (1 unit = 100 km, the capsule marker is enlarged about 30,000 times). The ribbon is coloured by stagnation heat flux.

Motion

Point mass over a spherical planet with flight-path angle γ (positive below the horizon): dv/dt = −ρv²/(2β) + g sinγ, dγ/dt = (g/v − v/r) cosγ − (L/D) cosφ ρv/(2β), dh/dt = −v sinγ, with β = m/(CDA), exponential density ρ = ρ0e−h/H (H = 7.2 km) and φ the roll of the lift vector. Without gravity and curvature the speed is the Allen–Eggers solution v = v0 exp[−ρH/(2β sinγ)] with peak deceleration v0² sinγ/(2eH).

Heating and glow

Stagnation heat flux follows Sutton–Graves, q = k√(ρ/Rn) v³, with peak k v0³√(β sinγ/(3eHRn)) at v = v0e−1/6. The incandescent colour of the shield is the blackbody colour of the radiative-equilibrium wall temperature T = (q/(εσ))1/4 (ε = 0.85): an upper bound, because a real ablator absorbs and carries heat away. The shock-layer glow is a visual indication of heat flux (logarithmic), not a computed plasma. Charring darkens the shield in proportion to the accumulated heat load.

Honest simplifications

No radiative heating (important above about 10 km/s), no real-gas chemistry, no wind or planet rotation, constant roll angle, trim angle drawn only for show, exponential atmosphere. The planet texture is stylised (procedural noise), not real geography. No claim of mission accuracy.

Checks run in the page

  • The five checks of the 2D page: Allen–Eggers speed, peak deceleration and altitude, peak heat flux, energy ledger on the curved path, vacuum circular orbit.
  • The polyline of the drawn trajectory is measured in the scene: its length must equal the integral of speed, and its first segment must give the entry speed.
  • The marker altitude is read back from the scene at five times, and the wall temperature at peak heating from the shield glow code must equal (qmax/εσ)1/4.

Credits

Blender 5.2 capsule and planet with Cycles-baked textures (Draco GLB); Three.js r160.

Loading model...
Loading Blender model...
Altitude vs speed (white dot = now)
g-load and stagnation heat flux vs time
Radiative-equilibrium wall temperature and heat load
Entry corridor: peak g vs entry angle
Made with 🟠 Blender · Three.js