Ailerons roll, the elevator pitches, the rudder yaws - fly a light aircraft with real lift, drag, stability and stall.
The science
Forces. Lift L = ½ρV²S CL(α), drag D = ½ρV²S (CD0 + CL²/(πeAR)), thrust T = min(Tstatic, P/V)·throttle, weight mg. Level flight needs L = W, so the speed must rise when the wing's angle of attack is reduced.
Controls. Each surface changes the moment about one axis: ailerons Cl = Clδaδa (roll), elevator Cm = Cmδeδe (pitch), rudder Cn = Cnδrδr (yaw). Moments scale with q S b, so controls get heavier and more powerful as speed rises. Rotation obeys Euler's equations Iω̇ = M - ω x Iω.
Stability. Cmα < 0 (the tail) pitches the nose back to the trim angle; Clβ < 0 (dihedral) rolls the wings level after a sideslip; Cnβ > 0 (fin) points the nose into the wind; damping terms Cmq, Clp, Cnr stop oscillations. Right ailerons also yaw the nose left (adverse yaw): use a little rudder.
Stall. Beyond the critical angle (about 15 deg) the lift curve blends from attached-flow CL0+CLαα to a separated flat-plate curve sin 2α; the stall speed is Vs = √(2nW/(ρS CLmax)) and grows with load factor n. Flaps raise CL so Vs falls. Control authority is cut to 35% in separated flow and a small nose-down break is added.
Simplifications (honest). Quasi-steady aerodynamics with typical published light-aircraft coefficients (same order as a Cessna 172, not a certified model); no propeller torque or slipstream, no spin/autorotation or ground effect, no wind or turbulence, constant mass, simple wheel-contact model (touchdown faster than 3.6 m/s sink or with a large bank or pitch counts as a crash). The cockpit is for learning the physics, not for flight training.