Hot-Air Balloon

2D twin of the 3D balloon fleet: hot air is lighter than the cool air around it, and the burner only has to replace the heat the envelope loses.

Presets

Playback

Balloon, load and weather

The balloon floats where the weight of the displaced air equals the weight of the balloon, load and the hot air inside. Warmer ground air or a heavier basket lowers the ceiling for the same temperature.

Model checks

The science

What is modelled

The envelope is open at the bottom, so the air inside is at ambient pressure; only its temperature, and so its density, differs from the outside air. The ambient pressure and temperature follow the international standard atmosphere. A burner adds heat, the envelope loses heat to the air, and the vertical motion includes drag and added mass.

Equations

  • Density ρ = p / (R T), pressure p = p0 (T/T0)g/(R L).
  • Net lift (ρout - ρin) V g - m g; equilibrium Tin = p / (R (ρout - m/V)).
  • Heat: mair cp dT/dt = Q - UA (T - Tamb).
  • Drag 1/2 ρ Cd A v² gives a terminal climb speed.

Checks run in the page

  • The equilibrium temperature against bisection of the force balance.
  • Air density at 3000 m against the standard atmosphere table.
  • The steady burner heat balance.
  • The terminal climb rate from the drag balance.

Honest simplifications

A single uniform air temperature inside the envelope, a fixed heat-loss coefficient, no vents or parachute valve, no wind, no fuel burn and a simple autopilot. The thermal mass of the air is used for the temperature response; real envelopes also warm the fabric.

What to try
  • Keep the autopilot and move the target altitude: the balloon climbs until the temperature reaches the equilibrium value for that height.
  • Press Heavy basket, hot day: more heat is needed for the same altitude.
  • Untick the autopilot and set the burner heat by hand to see a slow climb and the ceiling at a fixed temperature.
Altitude against time
Equilibrium temperature against altitude
Air temperature inside
Ceiling against air temperature