Phononic Crystal
Bandgap Design Laboratory
Explore how periodic arrangements of alternating masses and elastic couplings control mechanical wave propagation. Design stop-bands, launch finite-chain experiments, inspect Bloch eigenvectors, analyse signals and create localized defect modes — all powered by one shared scientific engine.
Unit Cell Cross-section Laboratory
Inspect the alternating masses, spring couplings, repeating cell and relative mechanical displacement.
Open laboratory ↗ 02Bloch Dispersion Graph Laboratory
Map acoustic and optical branches across the first Brillouin zone and identify bandgaps.
Open laboratory ↗ 03Wave Propagation Experiment
Launch a force pulse into a finite lattice and observe the time-domain response.
Open laboratory ↗ 04Lattice Comparison Laboratory
Compare mass contrast, stiffness contrast and their effect on the dispersion structure.
Open laboratory ↗ 05Mathematical Model Explorer
Explore the Bloch eigenvalue problem, eigenfrequencies, displacement ratios and phase.
Open laboratory ↗ 06Bandgap Design Challenge
Engineer a periodic lattice to satisfy a target stop-band center and minimum width.
Open laboratory ↗ 07Signal Analysis & Report Laboratory
Calculate finite-chain harmonic transmission and inspect pulse response and FFT data.
Open laboratory ↗ 08Defect Mode Laboratory
Introduce a local mass or spring defect and investigate localized normal modes.
Open laboratory ↗One model, connected experiments
Every laboratory uses the same SI-unit parameter set: alternating masses mA and mB, spring constants k₁ and k₂, cell spacing, viscous damping and finite-chain conditions. When a parameter changes, it is carried into the next module through the URL state, with local storage and BroadcastChannel synchronization where supported.
Scientific scope
The core is a linear, one-dimensional, nearest-neighbour diatomic lattice. It includes analytical Bloch dispersion, finite-chain time integration, harmonic dynamic stiffness, FFT signal analysis and a symmetric normal-mode eigensolver. It does not claim to model full three-dimensional elasticity.