Acoustic Resonance Studio
Explore how sound travels through ducts and waveguides. Investigate impedance, reflection, resonance, standing-wave patterns and quarter-wave matching with one shared scientific engine. Change a scenario in any laboratory and carry it into the others.
Laboratory suite
SELECT A MODULE TO BEGINTube Cross-section
Inspect the longitudinal pressure field, tube geometry, nodes, antinodes and boundary behavior.
OPEN LAB → LAB 02 / ANALYSISFrequency Response
Sweep excitation frequency and identify resonant peaks, reflection minima and impedance changes.
OPEN LAB → LAB 03 / EXPERIMENTMicrophone Experiment
Traverse a virtual microphone through the duct and collect noisy pressure measurements.
OPEN LAB → LAB 04 / COMPARISONBoundary Comparison
Compare open, closed, matched and resistive terminations under identical excitation.
OPEN LAB → LAB 05 / THEORYWave Equation Explorer
Connect wavelength, wave number, characteristic impedance and standing-wave structure.
OPEN LAB → LAB 06 / DESIGN TASKResonance Challenge
Design a duct whose strongest response peak lands inside a specified target band.
OPEN LAB → LAB 07 / DATA WORKSPACEData Analysis & Report
Detect resonances, estimate quality factors and export reproducible analysis tables.
OPEN LAB → LAB 08 / APPLICATIONImpedance Matching Studio
Design a quarter-wave transformer and quantify how it reduces acoustic reflection.
OPEN LAB →Shared scientific model
ONE ENGINE · EIGHT COMPLEMENTARY VIEWS[ U(0) ] = [ C D ] [ U(L) ]
Zin = (A ZL + B) / (C ZL + D)
Each uniform duct section is represented by a complex acoustic transfer matrix. Matrices are cascaded along the duct; the outlet impedance closes the boundary-value problem. The model includes a low-loss propagation approximation, idealized terminations and a conservative plane-wave cutoff warning.