Presets
Playback
Apparatus
Model checks
The science
What is modelled
The bell, its headstock and the wheel form one rigid body turning on the gudgeon pins, a physical pendulum. The rope pulls on the wheel with a half-sine pulse lasting half a second. A pull that comes as the bell moves the right way adds energy; one that comes too early brakes the swing. A heavy clapper hangs free on its own pivot, lags behind and strikes the sound bow near the end of the swing.
Equations
- Bell:
I θ″ = −m g d sin θ − τfric + F(t) RwithI = m k²andτfric = 2.0 tanh(ω/0.03) + 1.2 ωN m. - Period:
T0 = 2π√(I / m g d)for small swings andT = T0 (2/π) K(sin(θ0/2))in general, with K computed by the arithmetic-geometric mean. - Rope:
F(t) = s Fmax sin(π t / 0.5 s)with Fmax = 450 N at radius R = 0.79 m; workW = ∫ τ ω dt. - Clapper on the moving pivot 0.41 m from the axis:
L ψ″ = −g sin ψ − a θ″ cos(θ−ψ) + a θ′² sin(θ−ψ), striking when the lag reaches 0.43 rad.
Checks run in the page
- Small-swing period against 2 pi sqrt(I/m g d).
- Large-swing period against the elliptic-integral formula.
- Rope work minus friction work against the change in swing energy.
- Free clapper on a fixed pivot against its pendulum period.
Honest simplifications
Masses, radii and rope force are round numbers typical of a medium ring bell, not data for a real one. This is the chiming range of up to 90 degrees; full-circle ringing, rope stretch and bell acoustics are not modelled. The automatic ringer pulls a fixed delay after each turning point.
What to try
- Press Pull too early and watch the swing die: the pulse then works against the motion.
- Press Heavy tenor: the period lengthens because I grows faster than m g d.
- Press Low stay, hard pull to see the bell bounce off the stay and the clapper stop striking.